Print a 4x6 label without a thermal printer
Many marketplaces and couriers give you a 4x6 inch label meant for thermal printers. Move My Label places it on one sticker of a normal A4 or US Letter label sheet.
Your PDF stays on your device. Nothing is uploaded.
Choose your label
or drop it here. The PDF from Royal Mail, Evri, InPost, Vinted, eBay, DPD or any courier.
Pick a free spot
Your sheet is shown below. Choose your label first.
A4, 4 labels per sheet: change
Remembered on this device.
Label not quite right?
Still wrong? Email us about this label. Your PDF isn’t sent, only its size and where we looked.
Your sheet: A4, 4 labels of 105 × 148 mm.
Print and Download appear here once your label is placed.
Set the scale to 100% or Actual size in the print dialog, not “Fit to page”.
Thermal labels on a normal printer
Label printers use 4x6 inch rolls. If you don’t have one, you can still print those labels on a sheet of stickers with an inkjet or laser printer. Move My Label works out the fit for your sheet: full size where it fits, turned sideways on US half-sheets, or slightly reduced if there’s no other way.
Steps
- Download the 4x6 label PDF.
- Choose it above. You’ll see “This PDF is a single label”.
- Check the sheet type under Pick a free spot and tap a free sticker.
- Print at 100%.
Questions
Does a 4x6 label fit a quarter of an A4 sheet?
Nearly. A 4x6 inch label is 101.6 × 152.4 mm and a quarter of A4 is 105 × 148.5 mm. Labels with a little blank margin fit at full size. If the printed part is taller than the sticker, Move My Label shrinks it slightly (to about 97%) and tells you, so you can check it prints clearly.
What about US Letter?
On US Letter half-sheet labels (8.5 × 5.5 inches), a 4x6 label is turned sideways and fits at full size.
My 4x6 label is sideways in the PDF. Is that a problem?
No. Move My Label follows the page's rotation, so the label prints the right way up for the spot you choose.